Engineering Hydrology 
Original article
https://doi.org/10.24866/2227-6858/2021-4/74-80

Akhmedova N., Naumov V.

NATALIA R. AKHMEDOVA, Candidate of Biological Sciences, Associate Professor (corresponding author), isfendi@mail.ru, https://orcid.org/0000-0003-3483-3580
VLADIMIR A. NAUMOV, Doctor of Technical Sciences, Head of Department, van-old@mail.ru, https://orcid.org/0000-0003-0560-5933
Kaliningrad State Technical University
Kaliningrad, Russia

Influence of the channel roughness factor change on the maximal design levels
of a small watercourse in a given river cross (Nelma river example)

Abstract: The watercourse resistance to the flow is usually expressed by a roughness coefficient, and significantly affects on the main hydraulic characteristics of a water object at its flow capacity evaluation. Any small watercourse has own features with sufficiently quick response to changes occurring over the entire catchment area, therefore it requires a separate study. In this article. The authors try to calculate the value of the roughness factor in high water according to observations of the Nelma river. It was found that the reference roughness factor leads to overestimated value of the maximal water level. The roughness factor is decreased with rise of Froude number according to calculations. The obtained results can be used in the development and correction of methods for determining the main design hydrological characteristics of watercourses determined for the safe use of the adjacent territories.

Keywords: watercourse, river, roughness, riverbed, factor, design level, resistance

See the reference in English at the end of the article

For citation: Akhmedova N., Naumov V. Influence of the channel roughness factor change on the maximal design levels of a small watercourse in a given river cross (Nelma river example). FEFU: School of Engineering Bulletin. 2021;(49):74-80. (In Russ.). https://doi.org/10.24866/2227-6858/2021-4/74-80